How To Remove Bathtub Drain: A Step-by-Step Guide (2024)

Removing a bathtub drain can seem like a daunting task, but it’s essential for maintaining your bathroom and ensuring proper drainage. Whether you’re replacing an old drain, clearing a clog, or upgrading your bathtub's functionality, understanding how to remove bathtub drain is a fundamental skill for any homeowner. In this guide, we will walk you through the process, covering everything from the tools you need to tips for a successful removal.

Tools and Materials Needed

Before diving into the steps of how to remove bathtub drain, it’s important to gather all necessary tools and materials. Having everything ready will streamline the process and help you avoid interruptions.

Essential Tools

  1. Drain Wrench: This specialized tool is designed to grip and unscrew bathtub drains easily. It’s particularly useful for stubborn drains that are difficult to loosen by hand.
  2. Plumber’s Putty: Used for sealing the drain to prevent leaks when installing a new one. It’s important to choose high-quality putty for optimal sealing.
  3. Screwdriver: Depending on your drain type, a flat-head or Phillips screwdriver may be required to remove any screws holding the drain in place.
  4. Pliers: These are useful for gripping and turning any stuck components or adjusting tight areas around the drain.
  5. Bucket or Towels: Place a bucket under the drain area or use towels to catch any residual water that may leak during the process.
  6. Gloves: Wearing gloves protects your hands from sharp edges and any debris that might be present.

Optional Materials

  • Replacement Drain: If you are replacing the old drain, ensure you have a new one that fits your bathtub. Check the specifications and compatibility with your bathtub model.
  • Drain Cleaner: If your drain is clogged, consider using a non-toxic drain cleaner to clear any buildup before removal. Opt for environmentally friendly options to avoid damaging your plumbing.

Having these tools and materials ready will help ensure your project goes smoothly, allowing you to confidently tackle removing the bathtub drain.

Identifying the Type of Bathtub Drain

Understanding the type of bathtub drain you have is crucial for successful removal. Different types of drains have unique mechanisms, which influence how they are removed. Here are some common types:

1. Lift-and-Turn Drains

These drains feature a knob that you lift to open and twist to close. They typically have a visible screw at the top, which can be removed to detach the drain. Understanding how it operates is key to successfully removing it without damaging any components.

2. Push-and-Pull Drains

With this type, you push down on the drain to close it and pull it to open. They often have a retaining clip or screw that must be removed for disassembly. The design of these drains can sometimes make them tricky to remove, so it’s important to know the specific mechanisms involved.

3. Toe-Touch Drains

These drains operate similarly to push-and-pull drains, but you press on the top of the drain to open and close it. They usually require unscrewing a retaining screw located underneath the drain to detach it successfully.

4. Pop-Up Drains

Pop-up drains are commonly found in bathtubs with a pop-up lever. The lever is connected to a mechanism that opens and closes the drain. Removing these drains often requires disassembling the lever system, which can be more complex than other types. Understanding how the lever functions will help in disassembling it correctly.

Knowing which type of drain you have will guide you through the appropriate removal method and is essential for understanding how to remove bathtub drain effectively.

Step-by-Step Instructions on How to Remove Bathtub Drain

Now that you’re equipped with the right tools and knowledge about the type of drain you’re dealing with, let’s delve into the detailed steps on how to remove a bathtub drain.

Step 1: Prepare the Area

Start by removing any items around the bathtub, including bath mats, personal care items, and shower curtains. Ensure the area is clean and dry to prevent slips and falls during the process. Place a bucket or towels under the drain area to catch any residual water that may leak during removal. This preparation can help minimize mess and make the process more efficient.

Step 2: Remove the Drain Stopper

Depending on your bathtub drain type, the first step typically involves removing the drain stopper.

  • For Lift-and-Turn Drains: Unscrew the knob at the top using your screwdriver. After removing the knob, you’ll see the drain body underneath.
  • For Toe-Touch and Push-and-Pull Drains: Gently pull or twist the stopper out to expose the drain. In some cases, you may need to unscrew a retaining clip or screw to detach it.
  • For Pop-Up Drains: You will need to locate the mechanism under the tub that connects to the drain lever. Detach any screws or clips to free the pop-up mechanism before removing the stopper.

This step is crucial, as removing the stopper allows you to access the main drain body for the subsequent steps.

Step 3: Use the Drain Wrench

Once the stopper is removed, it’s time to tackle the drain body itself.

  • Insert the drain wrench into the drain opening and turn it counterclockwise. Make sure you have a firm grip on the wrench to apply adequate force. If the drain is stubborn, try applying penetrating oil around the edges and let it sit for a few minutes to loosen any debris or rust that may be holding it in place.
  • In some cases, using a towel or rag wrapped around the drain wrench can help improve grip and prevent slipping.

Step 4: Clean the Area

After successfully removing the drain, inspect the area for any remaining debris or buildup. Use a cloth or sponge to wipe away any residue. If the old drain was clogged, consider using a non-toxic cleaner to flush out any remaining grime. Cleaning the area not only prepares it for a new drain but also helps you identify any potential plumbing issues that may need addressing before installation.

Step 5: Install the New Drain (If Applicable)

If you’re replacing the old drain with a new one, follow these steps to install it properly:

  • Apply plumber’s putty around the threads of the new drain before inserting it into the opening. Make sure the putty is evenly distributed to create a good seal.
  • Hand-tighten the drain first, ensuring it sits securely. Then, use the drain wrench to tighten it further, ensuring a snug fit without over-tightening. Over-tightening can damage the drain or cause leaks.
  • Finally, reattach the stopper according to its specific mechanism and check for proper operation. Ensure that it opens and closes smoothly and that there are no leaks.

Tips for Successfully Removing a Bathtub Drain

Removing a bathtub drain can be a straightforward process if done correctly. Here are some tips to enhance your experience and ensure successful completion:

1. Work Slowly and Methodically

Take your time during the removal process to avoid damaging the drain or surrounding plumbing. Rushing can lead to mistakes that may complicate the task, potentially leading to costly repairs.

2. Use the Right Tools

Always use the appropriate tools for the job. A dedicated drain wrench can make a significant difference in ease and effectiveness. If you find yourself struggling, reevaluate your tools before proceeding. Using the correct tools can prevent damage to your bathtub and the drain components.

3. Stay Safe and Clean

Wearing gloves and keeping a clean workspace will help prevent accidents and injuries. Always clean up afterward to avoid slips and maintain a tidy bathroom. If you’re working with chemicals, ensure proper ventilation to protect yourself.

4. Seek Professional Help if Needed

If you encounter significant resistance or the process becomes overly complicated, don’t hesitate to seek professional assistance. A plumber can provide the expertise needed to resolve any issues effectively and ensure that the drain is installed correctly.

Conclusion: Successfully Removing Your Bathtub Drain

Understanding how to remove bathtub drain is an invaluable skill for any homeowner. By equipping yourself with the right tools, identifying the type of drain, and following the step-by-step instructions provided, you can tackle this project with confidence. Regular maintenance and proper drainage will help keep your bathtub functioning optimally.

For ongoing drain maintenance and to prevent future clogs, consider products like Drain Strain, designed to catch debris before it enters your plumbing system. For more tips and products to help with your drain maintenance, visit Drain Strain today!

How To Remove Bathtub Drain: A Step-by-Step Guide (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Jamar Nader

Last Updated:

Views: 5255

Rating: 4.4 / 5 (55 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Jamar Nader

Birthday: 1995-02-28

Address: Apt. 536 6162 Reichel Greens, Port Zackaryside, CT 22682-9804

Phone: +9958384818317

Job: IT Representative

Hobby: Scrapbooking, Hiking, Hunting, Kite flying, Blacksmithing, Video gaming, Foraging

Introduction: My name is Jamar Nader, I am a fine, shiny, colorful, bright, nice, perfect, curious person who loves writing and wants to share my knowledge and understanding with you.